BCS Value microC (4th generation)

The following is supplied:

• Tool, Surface unit and Software
• Type: BCS Value-microC (on cable, microcontroller)
• Number of segments: 1 (with 20 sensors per segment; segment length: 2,000 mm)
• Tool measuring range: 2,000 mm (Standard) Optional up to 4,000 mm
• Resolution (sensor interval): 100 mm (Standard) Optional up to 200 mm)
• Integrated micro controller for analog measurement of the conductivity values from contact to contact
• Digital data transfer of the measured analog values to the surface unit
• Prepared for combining several segments to form systems with a total measuring range of 10 meters
• Dimensions: W=46 mm, H=20 mm (dimensions incl. fixing components)
• Max. operating pressure: 100 bar (optional: 200 bar)
• Max. operating temperature: 70° C
• Max. cable length: 3000 m

• Micro controller component for evaluating the depth of tool submergence
• Power supply: 90...230 V alternating voltage (option: 20..70 V DC/AC)
• LCD text display (2x20 characters, illuminated) for displaying the current state of operation, error messages and the current blanket level
• Analog output for recorder, SPS units or data transfer. Output 4..20 mA, display of blanket levels as well as of other conditions using stepped current values, electrically isolated
• Plastic housing corresponding to IP65 for installation in control cabinet or open setup
• Electrically isolated RS232 connection (9600 Baud); 3 meters max. cable length to Interpretation computer
• Connection for tool cable

Software:

The program requires an IBM compatible computer running Windows98® or higher. The software enables the operating parameters of the BCS-Value system to be set and can display the current blanket level.